:
: 1) Warm up ngine by driving at speeds greater than 12mph. - 20 /
: 2) Stop vehicle and turn ignitin switch OFF. -
: 3) Turn ignitin switch ON and make sure PWER indicator lamp comes on. - . 16
: 4) Turn ignitin switch OFF.
: 5) Move selector lever to D and turn manual switch ON. D, manual -
: 6) Turn ignitin switch ON. - .
: 7) Move selector lever to "3" and turn manual switch OFF. 3, manual -
: 8) Move selector level to "2" and turn manual switch ON. 2, manual -
: 9) Move selector lever to "1" and turn manual switch OFF. 1, manual -
: 10) Partially depress accelerator pedal (to turn idle switch off). -
: 11) Check code as displayed on PWER light. Blinking once every 1/4sec is normal.
: : To perform the self diag test for PREVIUS problems
: 1) Warm up ngine by driving at speeds greater than 12mph.
: 2) Stop vehicle and turn ignitin switch OFF.
: 3) Turn ignitin switch ON and make sure PWER indicator lamp comes on.
: 4) Turn ignitin switch OFF.
: 5) Move selector lever to "1" and turn manual switch ON.
: 6) Turn ignitin switch ON.
: 7) Move selector lever to "2" and turn manual switch OFF.
: 8) Move selector lever to "3" and turn manual switch ON.
: 9) Move selector lever to "D" and trun manual switch OFF.
: 10) Partially depress accelerator pedal (to turn idle switch off).
: 11) Check code as displayed on PWER light. Blinking once every 1/4sec is normal.
:
: Trouble codes:
: 11 Duty solnoid A
: 12 Duty solnoid B
: 13 Shift solnoid 3
: 14 Shift solnoid 2
: 15 Shift solnoid 1
: 21 ATF temp snsor
: 22 Atmospheric snsor
: 23 ngine revolutin signal
: 24 Duty solnoid C
: 25 ngine torque control signal
: 31 Throttle snsor
: 32 Vehicle speed snsor 1
: 33 Vehicle speed snsor 2
? !

© 2002 , 2007 1-